July 20154. Remove Hammer case section (8-28) from Motor section(29-33).Figure 65. Fix Socket 32-50 with two 1R040 and Vise.6. Set Hammer case section (8-28) to Socket 32-50.Figure 77. Turn clockwise Hammer case section (8-28) with Socket30-78 and Extension bar to loosen it.Figure 88. Hammer case complete can be disassembled as shown inthe figure on the left:- Bearing box complete (28)- O ring 40 (27)- Internal gear 51 (26)- Hammer section (17-25)- Hammer case complete section (8-16)Figure 9Extension barSocket 30-78(8-28)Socket 32-501R040(8-28)Vise(17-25) (8-16)(26)(27)(28)(8-28)(29-33)8 / 27

Makita DTD152 Technical Information

DTD152

Fig.1

INSTRUCTION MANUAL

Fig.3

Fig.4

GEBRUIKSAANWIJZING

MANUAL DE

BRUGSANVISNING

Fig.2

MANUAL DE INSTRUCCIONES