Makita DTM40 Instruction Manual

Also see for DTM40: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

53. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medicalattention right away. It may result in loss ofyour eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with anyconductive material.(2) Avoid storing battery cartridge in acontainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large current flow,overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 ﾟ C (122 ﾟ F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. Follow your local regulations relating todisposal of battery.SAVE THESE INSTRUCTIONS.CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries thathave been altered, may result in the battery burstingcausing fires, personal injury and damage. It will alsovoid the Makita warranty for the Makita tool and charger.Tips for maintaining maximum battery life1. Charge the battery cartridge beforecompletely discharged.Always stop tool operation and charge thebattery cartridge when you notice less toolpower.2. Never recharge a fully charged batterycartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with roomtemperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).Let a hot battery cartridge cool down beforecharging it.4. Charge the battery cartridge if you do not useit for a long period (more than six months).FUNCTIONAL DESCRIPTIONWARNING:• Always be sure that the tool is switched off andbattery cartridge is removed before adjusting orchecking function on the tool. Failure to switch offand remove the battery cartridge may result in seriouspersonal injury from accidental start-up.Installing or removing battery cartridge123012765CAUTION:• Always switch off the tool before installing orremoving of the battery cartridge.• Hold the tool and the battery cartridge firmly wheninstalling or removing battery cartridge. Failure tohold the tool and the battery cartridge firmly may causethem to slip off your hands and result in damage to thetool and battery cartridge and a personal injury.To remove the battery cartridge, slide it from the toolwhile sliding the button on the front of the cartridge.To install the battery cartridge, align the tongue on thebattery cartridge with the groove in the housing and slip itinto place. Insert it all the way until it locks in place with alittle click. If you can see the red indicator on the upperside of the button, it is not locked completely.CAUTION:• Always install the battery cartridge fully until the redindicator cannot be seen. If not, it may accidentally fall outof the tool, causing injury to you or someone around you.• Do not install the battery cartridge forcibly. If the cartridgedoes not slide in easily, it is not being inserted correctly.Battery protection system(Lithium-ion battery with star marking)10121281. Star marking1. Button2. Red indicator3. Battery cartridge

/ 32

Related manuals for Makita DTM40

Makita DTM40 Instruction Manual

Makita DTM41 Instruction Manual

This manual is suitable for:

DTM40 DTM50

manualsdatabase

Your AI-powered manual search engine