Makita DTM50ZX5 Instruction Manual

Also see for DTM40: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

10NOTE:• Forcing or excessive pressure on the tool mayreduce efficiency.• Before cutting operation, it is recommended topreset the orbital stroke rate 4 - 6.SandingCAUTION:• Do not reuse a sanding paper used for sandingmetal to sand wood.• Do not use a worn sanding paper or sanding paperwithout grit.012769Apply a sanding paper on the workpiece.NOTE:• Using a test material sample to try isrecommendable to determine a correct orbitalstroke rate suitable for your work.• Use a sanding paper with the same grit untilsanding the whole workpiece is completed.Replacing a sanding paper with different gritsanding paper may not get a fine finish.Dust extraction attachment(optional accessory)123456798012778• Install dust nozzles and dust attachment.• Install the nozzle band on the tool so that itsprotrusions fit in the holes in the tool to secure it.• Put the felt ring and the sanding pad on the dustattachment and then secure them with theapplication tool installation bolt.0128001. Nozzle band2. Dust nozzle3. Dust nozzle4. Dust attachment5. Felt ring6. Pad7. Application tool installation bolt8. Holes in the tool9. Protrusions on the nozzle band

/ 12

Related manuals for Makita DTM40