Makita DTP131 Instruction Manual

Also see for DTP131: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

4ENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model DTP131Work mode: impact drilling into concreteVibration emission (ah,ID) : 13 m/s2Uncertainty (K) : 1.5 m/s 2Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 8.5 m/s 2Uncertainty (K) : 2 m/s 2Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2Model DTP141Work mode: impact drilling into concreteVibration emission (ah,ID) : 13 m/s2Uncertainty (K) : 1.5 m/s 2Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 10.5 m/s 2Uncertainty (K) : 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-18For European countries onlyEC Declaration of ConformityMakita declares that the following Machine(s):Designation of Machine:Cordless 4 Mode Impact DriverModel No./ Type: DTP131, DTP141Conforms to the following European Directives:2006/42/ECThey are manufactured in accordance with the followingstandard or standardized documents:EN60745The technical file in accordance with 2006/42/EC isavailable from:Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium29.5.2015000331Yasushi FukayaDirectorMakita, Jan-Baptist Vinkstraat 2, 3070, BelgiumGEA010-1General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions forfuture reference. GEB078-2CORDLESS 4 MODE IMPACTDRIVER SAFETY WARNINGS1. Wear ear protectors when impact drilling.Exposure to noise can cause hearing loss.2. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.3. Hold power tool by insulated grippingsurfaces, when performing an operationwhere the fastener may contact hidden wiring.Fasteners contacting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.4. Hold power tool by insulated grippingsurfaces, when performing an operationwhere the cutting accessory may contacthidden wiring. Cutting accessory contacting a"live" wire may make exposed metal parts of thepower tool "live" and could give the operator anelectric shock.