Makita DUC150Z Instruction Manual

Also see for DUC101: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

12 ENGLISH10. Place the sprocket cover so that the bolt and pinon the tool body meet their counterparts on the sprocketcover.132Fig.15► 1. Sprocket cover 2. Bolt 3. Pin11. Turn the lever clockwise until the sprocket cover issecured then return it to the original position.12Fig.16► 1. Lever 2. Sprocket coverMake sure that the saw chain does not loose and thesaw chain can be moved smoothly back and forth. Ifnecessary, adjust the tension of the saw chain by refer -ring to the section for adjusting saw chain tension.Adjusting saw chain tensionCAUTION: A chain which is too loose canjump off the bar and it may cause an injury oraccident.The saw chain may become loose after many hoursof use. From time to time check the saw chain tensionbefore use.If the saw chain is loose, adjust the saw chain tension.1. Pull the lever up.1Fig.17► 1. Lever2. Turn the lever counterclockwise a little to loosenthe sprocket cover lightly. The chain tension is adjustedautomatically.21Fig.18► 1. Sprocket cover 2. Lever