Makita DVC340 Instruction Manual

Also see for DVC340: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8Installing dust bag123 4011113Hold the square section of the dust bag joint and fit thepins inside the dust bag joint to the notches in the dustoutlet of the cleaner and then insert and turn it clockwiseall the way until it stops.Fig.5At this time, make sure that the fastener part on the dustbag faces upward.NOTE:• When the dust bag joint and the ring inside the dustbag come off, install as follows.(1) Align the dust bag joint with the seam of thedust bag and install it so that its protrusionfaces upward.Fig.6(2) Tighten the ring inside the dust bag firmly sothat the pins and the ring are positioned asshown in the figure.Fig.7Installing the shoulder strapFig.8Attach one end hook of the shoulder strap onto the ring inthe front of the cleaner and thrust the other end of thestrap through the band of the dust bag and then attachthe other end hook as shown in the figure.Adjusting the shoulder strapFig.9To adjust the length of the shoulder strap, pull it out toyour desired length and pull the strap in the direction ofarrow as shown in the figure.Connecting the hoseCAUTION:• Do not force the hose to bend it and/or stamp it.Forcing and/or stamping the hose may causedeformation or damage to the hose.• Do not pull the hose to carry the cleaner. Pulling thehose may cause deformation or damage to the hose.12AB011119Insert the "A" end of the hose to the suction opening ofthe cleaner and turn it clockwise all the way until it locks.Attach the cuff on the "B" end of the hose and thenconnect it to the dust outlet of an power tool.Replacing the front cuffChange the front cuff of the hose according to the dustoutlet size of a power tool you use.Fig.10To remove the front cuff, hold the hose and turn itcounterclockwise.To mount the front cuff, turn it clockwise and then screwit in until it stops.OPERATIONWARNING:• Do not use the shoulder strap when working in ahigh place.• When using the cleaner as a stationary cleaner,place it on a flat and stable surface.Vacuum CleanerFig.11When using the cleaner as a portable cleaner,cross-hanging the shoulder strap before the breast isdifficult to drop the cleaner.1. Dust outlet2. Dust bag joint3. Pins4. Dust bag 1. Dust outlet2. Power tool