Makita EB7660TH Instruction Manual

Also see for EB7660TH: Original instruction manual Original instruction manual Original instruction manual Original instruction manual Instruction manual

Contents

Makita EB7660TH Instruction Manual Manual pdf 7 page image

ASSEMBLYCAUTION: Before performing any work on the blower, alwaysstop the engine and pull the spark plug cap off the spark plug.CAUTION: Start the blower only after having assembled itcompletely.CAUTION: Always wear protective gloves.Assembling blower pipes1. Insert the swivel pipe into the lexible pipe and tighten them withthe hose band.231Ź 1. Swivel pipe 2. Flexible pipe 3. Hose band2. Loosen and remove the clamp screw.1Ź 1. Clamp screw3. Install the control handle / handle assembly onto the swivel pipeand tighten them with the clamp screw.21Ź 1. Control handle / handle assembly 2. Clamp screw4. Attach the lexible pipe to the elbowFor tube throttle model: Insert the elbow to the lexible pipe. Attachthe cable holder between the hose band and the lexible pipe. Tightenthe cable holder, lexible pipe and elbow with the hose band. Set thecontrol cable onto the cable holder, and close the cable holder.1 32Ź 1. Elbow 2. Cable holder 3. Hose band21Ź 1. Cable holder 2. Control cableFor hip throttle model: Insert the elbow to the lexible pipe. Tightenthe lexible pipe and the elbow with the hose band.5. Attach the long/short pipe to the swivel pipe. Turn the long/shortpipe clockwise to lock it into place. Then attach the blower nozzle withthe long/short pipe. Turn the blower nozzle clockwise to lock it intoplace.12Ź 1. Long/short pipe 2. Blower nozzle6. Make sure all clamps are tight.7 ENGLISH