Makita EH7500S Instruction Manual

Also see for EH7500S: Instruction manual Instruction manual

Contents

5Starting up the Hedge Trimmer- Please make sure that there are no children or other people within a workingrange of 15 meters (5), also pay attention to any animals in the working vicinity.- Before operating, always check that the Hedge Trimmer is safe for operation:- Check the security of the throttle lever. The throttle lever should be checked forsmooth and easy action. Check for proper functioning of the throttle lever lock.Check for clean and dry handles and test the function of the I-O Switch. Keephandles free of oil and fuel.Start the Hedge Trimmer only in accordance with the instructions.Do not use any other methods for starting the engine (6)!- Use the Hedge Trimmer only for applications specified.- Start the Hedge Trimmer engine only after the entire assembly is done. Operationof the Hedge Trimmer is permitted only after all the appropriate accessories areattached!- Before starting, make sure that the cutter blade will not contact any objects suchas branches, stones, etc.- The engine is to be stopped immediately if there are any engine problems.- When working with the Hedge Trimmer, keep both hands on handles alwayswrap your fingers tightly around the handle, keeping the control handle cradledbetween your thumb and forefinger. Keep your hand in this position to have yourmachine under control at all times. Make sure your control handle is in goodcondition and free of moisture, pitch, oil or grease.Always ensure a safe, well-balanced footing.- Only use outdoors.- Always be aware of your surroundings and stay alert for possible hazards thatyou may not hear due to the noise of the machine.- Operate the Hedge Trimmer in such a manner as to avoid inhalation of theexhaust gases. Never run the engine in enclosed rooms (risk of suffocation andgas poisoning). Carbon monoxide is an odorless gas. Always ensure there isadequate ventilation.- Stop the engine when resting and when leaving the Hedge Trimmer unattended.Place it in a safe location to prevent danger to others, setting fire to combustiblematerials or damage to the machine.- Never lay down the hot Hedge Trimmer onto dry grass or onto any combustiblematerials.- To reduce fire hazard keep engine and silencer free of debris, leaves, orexcessive lubricant;- Never operate the engine with a faulty exhaust muffler.- Stop the engine during transport (7).- Stop the engine or disconnect from mains before:- Cleaning or when cleaning a blockage;- Checking, maintenance or working on the machine.- Position the Hedge Trimmer safely during car or truck transportation to avoid fuelleakage.- When transporting the Hedge Trimmer ensure that the fuel tank is completelyempty to avoid fuel leakage.- When transporting or storing the machine always fit the cutting device guard.Refuelling- Stop the engine before refuelling (7), keep well away from open flame (8) and donot smoke.- Do not attempt to refuel a hot or a running engine.- Avoid skin contact with petroleum products. Do not inhale fuel vapor. Alwayswear protective gloves during refuelling. Change and clean protective clothing atregular intervals.- Take care not to spill either fuel or oil in order to prevent soil contamination(environmental protection). Clean the Hedge Trimmer immediately after fuel hasbeen spilt. Allow wet cloths to dry before disposing in proper, covered container toprevent spontaneous combustion.- Avoid any fuel contact with your clothing. Change your clothing immediately if fuelhas been spilled on it (danger hazard).- Inspect the fuel cap at regular intervals making sure that it stays securely fastened.- Carefully tighten the fuel tank cap. Change locations to start the engine (at least 3meters away from the place of refuelling) (9).- Never refuel in closed rooms. Fuel vapors accumulate at ground level (risk ofexplosions).- Only transport and store fuel in approved containers. Make sure stored fuel is notaccessible to children.- When mixing gasoline with two-stroke engine oil, use only gasoline whichcontains no ethanol or methanol (types of alcohol).This will help to prevent damage to fuel lines and other engine parts.15 meters(50 feet)360°(5)(6)(7)• Resting• Transporting• Refuelling• Maintenance• Tool Replacement(8)(9)3 meters(10 feet)