Makita EM3400U Original Instruction Manual

Also see for EM3400L: Original instruction manual Original instruction manual Original instruction manual Instruction manual Instruction manual

Contents

Makita EM3400U Original Instruction Manual Manual pdf 9 page image

9CAUTION: Before doing any work on the equipment, always stop the engine and pull the spark plug connector off the spark plug.Always wear protective gloves!CAUTION: Start the engine only after having assembled it completely.MOUNTING OF HANDLEFor loop handle models– Fix a barrier (1) to the left side of the machine together with the handle foroperator protection.– 0DNHVXUHWKDWWKHJULSEDUULHUDVVHPEO\LV¿WWHGEHWZHHQWKHVSDFHUDQGWKHarrow mark (2).WARNING: Do not remove or shrink the spacer (3). The spacer keeps acertain distance between both hands. Setting the grip/barrierassembly close to the other grip beyond the length of thespacer may cause loss of control and serious personal injury.NOTE:– ,QVRPHFRXQWULHVWKHVSDFHULVQRWLQFOXGHG,QWKDWFDVH¿WWKHJULSEDUULHUassembly between arrow marks.(1)(2)(3)(2)(1)For bike handle models– Place the handle with the throttle lever on the handle holder on the right side (tobe held by the right hand) and the other on the left side.– )LWWKHKDQGOHHGJHWRWKHKDQGOHKROGHUJURRYHDQGSURYLVLRQDOO\¿[WKHXSSHUside (1) of the handle holder by four bolts M5 x 25 (2).– Adjust the handle to an angle easy to manipulate, and tighten the bolt (2)uniformly on the right and left sides.EM3400UEM3400L