Makita EM4250 Instruction Manual

Also see for EM4250: Instruction manual Parts Breakdown Instruction manual

Contents

Makita EM4250 Instruction Manual Manual pdf 9 page image

9CAUTION: Before doing any work on the brush cutter, always stop the engineand pull the spark plug connector off the spark plug.Always wear protective gloves!CAUTION: Start the brush cutter only after having assembled it completely.For machines with U Handle modelsInsert the handle bar into the handle holder, making sure that the boss in the–handle holder fits into the hole in the handle.After the handle bar is in place, tighten the four bolts (M5 x 25).–NOTE: Be sue the bolts are tight, but do not overtighten.MOUNTING OF HANDLEFit the control cable (together with the earth cord) to the handle with two–clips (3).Avoid any tendency of the control cable to loop at the handle bar.–For machines with Loop HandleFix a barrier to the left side of the machine together with the handle for–operator protection.Make sure that the grip/barrier assembly is fitted between the spacer and the–arrow mark.WARNING: Do not remove or shrink the spacer. The spacer keeps a certaindistance between both hands. Setting the grip/barrier assemblyclose to the other grip beyond the length of the spacer may causeloss of control and serious personal injury.Arrow markto engine(3)to engine