Makita HP2040 Instruction Manual

Also see for HP2040: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Depth gaugeThe depth gauge is convenient for drillingholes of uniform depth Loosen the sidegrip and insert the depth gauge into thehole in the side grip Adjust the depthgauge to the desired depth and tighten theside gripNOTE:DepthThe depth gauge cannot be used at the position where the depth gauge strikes against thegear housing.OPERATIONSwitch actionCAUTION:Before plugging in the tool, always check to see that the switch trigger actuates properlyand returns the "OFF" position whenreleased.To start the tool, simply pull the triggerTool speed is increased by increasing pres-sure on the trigger Release the trigger tostop For continuous operation, pull the trig-ger and then push in the lock button Tostop the tool from the locked position, pullthe trigger fully, then release itSwitch triggerLock buttonReversing switch actionCAUTION:*Always check the direction of rotation before operation*Use the reversing switch only after the tool comes to a complete stop. Changing thedirection of rotation before the tool stops may damage the toolThis tool has a reversing switch to changethe direction of rotation Move the reversingswitch lever to the fj' position for clockwiserotation or the 8 position for counterclock-wise rotation Reversingswitch lever