Makita HR2800 Instruction Manual

Also see for HR2811F: Brochure & specs Parts Breakdown Instruction manual Instruction manual Instruction manual

Contents

5For Model HR2800 ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto 60745-2-6:Sound pressure level (LpA) : 89 dB(A)Sound power level (LWA) : 100 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG217-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : hammer drilling into concrete, 10 mmdiameter and 100 mm depthVibration emission (ah,HD) : 20 m/s 2Uncertainty (K) : 1.5 m/s 2For Model HR2810, 2810T ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto 60745-2-6:Sound pressure level (LpA) : 89 dB(A)Sound power level (LWA) : 100 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG215-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : chiseling functionVibration emission (ah,CHeq ) : 15.5 m/s2Uncertainty (K) : 1.5 m/s 2ENG303-1Work mode : hammer drilling into concrete, 10 mmdiameter and 100 mm depthVibration emission (ah,HD) : 20 m/s 2Uncertainty (K) : 1.5 m/s 2For Model HR2811F, HR2811FT ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto 60745-2-6:Sound pressure level (LpA) : 90 dB(A)Sound power level (LWA) : 101 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG215-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : chiseling functionVibration emission (ah,CHeq ) : 11.5 m/s 2Uncertainty (K) : 1.5 m/s 2ENG303-1Work mode : hammer drilling into concrete, 10 mmdiameter and 100 mm depthVibration emission (ah,HD) : 15 m/s 2Uncertainty (K) : 1.5 m/s 2ENH101-8EC-DECLARATION OF CONFORMITYModel; HR2800, HR2810, HR2810T, HR2811F,HR2811FTWe declare under our sole responsibility that thisproduct is in compliance with the following standards ofstandardized documents;EN60745, EN55014, EN61000 in accordance withCouncil Directives, 2004/108/EC, 98/37/EC.CE2007000230Tomoyasu KatoDirectorResponsible Manufacturer:Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPANAuthorized Representative in Europe:Makita International Europe Ltd.Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLAND GEB007-2SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto rotary hammer safety rules. If you use this toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Wear ear protectors. Exposure to noise cancause hearing loss.2. Use auxiliary handles supplied with the tool.Loss of control can cause personal injury.3. Hold power tools by insulated grippingsurfaces when performing an operation wherethe cutting tool may contact hidden wiring orits own cord. Contact with a "live" wire will makeexposed metal parts of the tool "live" and shockthe operator.4. Wear a hard hat (safety helmet), safety glassesand/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is alsohighly recommended that you wear a dustmask and thickly padded gloves.5. Be sure the bit is secured in place beforeoperation.6. Under normal operation, the tool is designedto produce vibration. The screws can comeloose easily, causing a breakdown or accident.Check tightness of screws carefully beforeoperation.7. In cold weather or when the tool has not beenused for a long time, let the tool warm up for awhile by operating it under no load. This willloosen up the lubrication. Without proper

/ 56

Related manuals for Makita HR2811F

Makita HR2800 Instruction Manual

This manual is suitable for:

HR2811F HR2800 HR2810 HR2810T HR2811FT

manualsdatabase

Your AI-powered manual search engine