2ENGLISHSPECIFICATIONSModel HR2800/HR2810 HR2810T HR2811F HR2811FTTungsten-carbide tipped bit 28 mmCore bit 80 mmConcreteDiamond core bit (dry type) 80 mmSteel 13 mmCapacitiesWood 32 mmNo load speed (min -1) 0 - 1,100Blows per minute 0 - 4,500Overall length 314 mm 339 mm 320 mm 345 mmNet weight 3.4 kg 3.5 kg 3.5 kg 3.6 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-5SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.・ Read instruction manual.・ DOUBLE INSULATION・ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility.For Model HR2800 ENE042-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone.It is also suitable for drilling without impact in wood,metal, ceramic and plastic.For Model HR2810, HR2810T, HR2811F, HR2811FTENE043-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone as well as for chiselling work.It is also suitable for drilling without impact in wood,metal, ceramic and plastic. ENF002-1Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated in accordance with EuropeanStandard and can, therefore, also be used from socketswithout earth wire. GEA005-2General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.