Makita HR4001C Instruction Manual

Also see for HR4001C: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

2ENGLISH (Original instructions)SPECIFICATIONSModel HR4001C HR4010C HR4011CCarbide-tipped bit 40 mmCapacities Core bit 105 mmNo load speed (min -1) 235 - 480Blows per minute 1,350 - 2,750Overall length 468 mmNet weight 6.3 kg 6.7 kg 6.7 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-5SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.읭 Read instruction manual.읭 DOUBLE INSULATION읭 Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatible recyclingfacility. ENE044-1Intended useThe tool is intended for hammer drilling in brick, concreteand stone as well as for chiselling work. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model HR4001CSound pressure level (LpA) : 92 dB(A)Sound power level (LWA) : 103 dB(A)Uncertainty (K) : 3 dB(A)Model HR4010C,HR4011CSound pressure level (LpA) : 90 dB(A)Sound power level (LWA) : 101 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model HR4001CWork mode : chisellingVibration emission (ah,CHeq ) : 10.5 m/s2Uncertainty (K) : 2.0 m/s 2Work mode : chiselling function with side gripVibration emission (ah,CHeq ) : 10.0 m/s2Uncertainty (K) : 2.5 m/s 2Work mode : hammer drilling into concreteVibration emission (ah,HD) : 12.5 m/s 2Uncertainty (K) : 1.5 m/s 2Model HR4010CWork mode : chisellingVibration emission (ah,CHeq ) : 7.0 m/s2Uncertainty (K) : 1.5 m/s 2Work mode : chiselling function with side gripVibration emission (ah,CHeq ) : 8.0 m/s2Uncertainty (K) : 1.5 m/s 2Work mode : hammer drilling into concreteVibration emission (ah,HD) : 9.0 m/s 2Uncertainty (K) : 1.5 m/s 2