Makita HR4501C Instruction Manual

Also see for HR4501C: Instruction manual Brochure & specs Instruction manual Instruction manual Instruction manual

Contents

3operating power tools may result in seriouspersonal injury.10. Use safety equipment. Always wear eyeprotection. Safety equipment such as dust mask,non-skid safety shoes, hard hat, or hearingprotection used for appropriate conditions willreduce personal injuries.11. Avoid accidental starting. Ensure the switch isin the off-position before plugging in. Carryingpower tools with your finger on the switch orplugging in power tools that have the switch oninvites accidents.12. Remove any adjusting key or wrench beforeturning the power tool on. A wrench or a key leftattached to a rotating part of the power tool mayresult in personal injury.13. Do not overreach. Keep proper footing andbalance at all times. This enables better controlof the power tool in unexpected situations.14. Dress properly. Do not wear loose clothing orjewellery. Keep your hair, clothing, and glovesaway from moving parts. Loose clothes,jewellery or long hair can be caught in movingparts.15. If devices are provided for the connection ofdust extraction and collection facilities,ensure these are connected and properly used.Use of these devices can reduce dust-relatedhazards.Power tool use and care16. Do not force the power tool. Use the correctpower tool for your application. The correctpower tool will do the job better and safer at therate for which it was designed.17. Do not use the power tool if the switch doesnot turn it on and off. Any power tool that cannotbe controlled with the switch is dangerous andmust be repaired.18. Disconnect the plug from the power sourceand/or the battery pack from the power toolbefore making any adjustments, changingaccessories, or storing power tools. Suchpreventive safety measures reduce the risk ofstarting the power tool accidentally.19. Store idle power tools out of the reach ofchildren and do not allow persons unfamiliarwith the power tool or these instructions tooperate the power tool. Power tools aredangerous in the hands of untrained users.20. Maintain power tools. Check for misalignmentor binding of moving parts, breakage of partsand any other condition that may affect thepower tools operation. If damaged, have thepower tool repaired before use. Many accidentsare caused by poorly maintained power tools.21. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.22. Use the power tool, accessories and tool bitsetc. in accordance with these instructions andin the manner intended for the particular typeof power tool, taking into account the workingconditions and the work to be performed. Useof the power tool for operations different fromthose intended could result in a hazardoussituation.SERVICE23. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.24. Follow instruction for lubricating andchanging accessories.25. Keep handles dry, clean and free from oil andgrease. GEB007-2SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto rotary hammer safety rules. If you use this toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Wear ear protectors. Exposure to noise cancause hearing loss.2. Use auxiliary handles supplied with the tool.Loss of control can cause personal injury.3. Hold power tools by insulated grippingsurfaces when performing an operation wherethe cutting tool may contact hidden wiring orits own cord. Contact with a "live" wire will makeexposed metal parts of the tool "live" and shockthe operator.4. Wear a hard hat (safety helmet), safety glassesand/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is alsohighly recommended that you wear a dustmask and thickly padded gloves.5. Be sure the bit is secured in place beforeoperation.6. Under normal operation, the tool is designedto produce vibration. The screws can comeloose easily, causing a breakdown or accident.Check tightness of screws carefully beforeoperation.7. In cold weather or when the tool has not beenused for a long time, let the tool warm up for awhile by operating it under no load. This willloosen up the lubrication. Without properwarm-up, hammering operation is difficult.

/ 12

Related manuals for Makita HR4501C

Makita HR4501C Instruction Manual

This manual is suitable for:

HR4501C HR4510C HR4511C

manualsdatabase

Your AI-powered manual search engine