Makita HS003G Instruction Manual

Also see for HS003G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

13 ENGLISHFor tool with the ring1234567► 1. Hex bolt 2. Outer flange 3. Circular saw blade4. Arrow on the circular saw blade 5. Ring 6. Innerflange 7. Arrow on the toolTo install the circular saw blade, follow the removalprocedure in reverse.Align the direction of the arrow on the blade with thearrow on the tool.For tool with the inner flange forother than 15.88 mm hole-diametersaw bladeThe inner flange has a certain diameter protrusion onone side of it and a different diameter protrusion on theother side. Choose a correct side on which protrusionfits into the saw blade hole perfectly. Mount the innerflange onto the mounting shaft so that the correct sideof protrusion on the inner flange faces outward and thenplace saw blade and outer flange.1 2345► 1. Mounting shaft 2. Inner flange 3. Circular sawblade 4. Outer flange 5. Hex boltWARNING: BE SURE TO TIGHTEN THE HEXBOLT CLOCKWISE SECURELY. Also be carefulnot to tighten the bolt forcibly. Slipping your handfrom the hex wrench can cause a personal injury.WARNING: Make sure that the protrusion "a"on the inner flange that is positioned outside fitsinto the saw blade hole "a" perfectly. Mounting theblade on the wrong side can result in the dangerousvibration.For tool with the inner flange for a15.88 mm hole-diameter saw blade(country specific)Mount the inner flange with its recessed side facingoutward onto the mounting shaft and then place circu-lar saw blade (with the ring attached if needed), outerflange and hex bolt.For tool without the ring1 2345► 1. Mounting shaft 2. Inner flange 3. Circular sawblade 4. Outer flange 5. Hex boltFor tool with the ring1 2345615.8815.8815.88► 1. Mounting shaft 2. Inner flange 3. Circular sawblade 4. Outer flange 5. Hex bolt 6. Ring