Makita HS004G Instruction Manual

Also see for HS004G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

2 ENGLISHSPECIFICATIONSModel: HS004GBlade diameter 185 mm - 190 mmMax. Cutting depth at 0° 60.0 mm - 62.5 mmat 45° bevel 43.0 mm - 44.5 mmat 48° bevel 41.0 mm - 42.0 mmNo load speed 6,000 min-1Rated voltage D.C. 36 V - 40 V maxOverall length with BL4025 322 mmwith BL4040 337 mmNet weight 4.4 - 5.0 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi -est combinations, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL4020 / BL4025 / BL4040* / BL4050F** : Recommended batteryCharger DC40RA / DC40RB / DC40RC• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.SymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Read instruction manual.Wear safety glasses.Ni-MHLi-ionOnly for EU countriesDue to the presence of hazardous com-ponents in the equipment, waste electricaland electronic equipment, accumulatorsand batteries may have a negative impacton the environment and human health.Do not dispose of electrical and electronicappliances or batteries with householdwaste!In accordance with the European Directiveon waste electrical and electronic equip-ment and on accumulators and batteriesand waste accumulators and batteries,as well as their adaptation to national law,waste electrical equipment, batteries andaccumulators should be stored separatelyand delivered to a separate collection pointfor municipal waste, operating in accor-dance with the regulations on environmen-tal protection.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Intended useThe tool is intended for performing lengthways and crosswaysstraight cuts and miter cuts with angles in wood while in firmcontact with the workpiece. With appropriate Makita genuinesaw blades, other materials can also be sawed.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-5:Sound pressure level (LpA) : 93 dB(A)Sound power level (LWA) : 104 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) may alsobe used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declared val -ue(s) depending on the ways in which the tool is usedespecially what kind of workpiece is processed.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estimationof exposure in the actual conditions of use (takingaccount of all parts of the operating cycle such as thetimes when the tool is switched off and when it is run -ning idle in addition to the trigger time).

/ 24

Related manuals for Makita HS004G

Makita HS004G Instruction Manual

Makita HS003G Instruction Manual

This manual is suitable for:

HS004G

manualsdatabase

Your AI-powered manual search engine