Makita JS1600 Instruction Manual

Also see for JS1600: Instruction manual Instruction manual Technical information Instruction manual Instruction manual

Contents

2ENGLISH (Original instructions)SPECIFICATIONSModel JS1600Steel up to 400 N/mm 2 1.6 mm (16 ga.)Steel up to 600 N/mm 2 1.2 mm (18 ga.)Steel up to 800 N/mm 2 0.8 mm (22 ga.)Max. cutting capacitiesAluminum up to 200 N/mm 2 2.5 mm (13 ga.)Min. cutting radius 30 mm (1-1/4")Strokes per minute 4,000/min.Overall length 230 mm (9-1/8")Net weight 1.8 kg (3.9 lbs)• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003GEA001-3GENERAL SAFETY RULESWARNING! Read all instructions. Failure to follow allinstructions listed below may result in electric shock, fireand/or serious injury. The term "power tool" in all of thewarnings listed below refers to your mains-operated(corded) power tool or battery-operated (cordless) powertool.SAVE THESE INSTRUCTIONS.Work area safety1. Keep work area clean and well lit. Cluttered anddark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical Safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your body is earthed or grounded.6. Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.7. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edges ormoving parts. Damaged or entangled cordsincrease the risk of electric shock.8. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use ofa cord suitable for outdoor use reduces the risk ofelectric shock.Personal Safety9. Stay alert, watch what you are doing and usecommon sense when operating a power tool.Do not use a power tool while you are tired orunder the influence of drugs, alcohol ormedication. A moment of inattention whileoperating power tools may result in seriouspersonal injury.10. Use safety equipment. Always wear eyeprotection. Safety equipment such as dust mask,non-skid safety shoes, hard hat, or hearingprotection used for appropriate conditions willreduce personal injuries.11. Avoid accidental starting. Ensure the switch isin the off-position before plugging in. Carryingpower tools with your finger on the switch orplugging in power tools that have the switch oninvites accidents.12. Remove any adjusting key or wrench beforeturning the power tool on. A wrench or a key leftattached to a rotating part of the power tool mayresult in personal injury.13. Do not overreach. Keep proper footing andbalance at all times. This enables better controlof the power tool in unexpected situations.14. Dress properly. Do not wear loose clothing orjewellery. Keep your hair, clothing, and glovesaway from moving parts. Loose clothes,jewellery or long hair can be caught in movingparts.15. If devices are provided for the connection ofdust extraction and collection facilities,

/ 20

Related manuals for Makita JS1600

Makita JS1600 Instruction Manual

Makita JS1602 Instruction Manual

This manual is suitable for:

JS1600

manualsdatabase

Your AI-powered manual search engine