Makita KP0810 Instruction Manual
Also see for KP0810: Instruction manualParts BreakdownInstruction manualInstruction manualInstruction manual
            | |
4of power tool, taking into account the workingconditions and the work to be performed. Useof the power tool for operations different fromthose intended could result in a hazardoussituation.SERVICE23. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.24. Follow instruction for lubricating andchanging accessories.25. Keep handles dry, clean and free from oil andgrease. GEB010-2SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto planer safety rules. If you use this tool unsafely orincorrectly, you can suffer serious personal injury.1. Wait for the cutter to stop before setting thetool down. An exposed cutter may engage thesurface leading to possible loss of control andserious injury.2. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.3. Rags, cloth, cord, string and the like shouldnever be left around the work area.4. Avoid cutting nails. Inspect for and remove allnails from the workpiece before operation.5. Use only sharp blades. Handle the blades verycarefully.6. Be sure the blade installation bolts aresecurely tightened before operation.7. Hold the tool firmly with both hands.8. Keep hands away from rotating parts.9. Before using the tool on an actual workpiece,let it run for a while. Watch for vibration orwobbling that could indicate poor installationor a poorly balanced blade.10. Make sure the blade is not contacting theworkpiece before the switch is turned on.11. Wait until the blade attains full speed beforecutting.12. Always switch off and wait for the blades tocome to a complete stop before any adjusting.13. Never stick your finger into the chip chute.Chute may jam when cutting damp wood.Clean out chips with a stick.14. Do not leave the tool running. Operate the toolonly when hand-held.15. Always change both blades or covers on thedrum, otherwise the resulting imbalance willcause vibration and shorten tool life.16. Use only Makita blades specified in thismanual.17. Always use the correct dust mask/respiratorfor the material and application you areworking with.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Adjusting depth of cut12007639Depth of cut may be adjusted by simply turning the knobon the front of the tool so that the pointer points thedesired depth of cut.Switch actionCAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.120076401. Lock button /Lock-off button2. Switch trigger1. Knob2. Pointer |
Related manuals for Makita KP0810
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810 Instruction Manual
Makita KP0810C Instruction Manual
manualsdatabase
Your AI-powered manual search engine