Makita KP0810 Instruction Manual

Also see for KP0810: Instruction manual Parts Breakdown Instruction manual Instruction manual Instruction manual

Contents

9123007647Install the edge fence on the tool and secure it with thewasher and thumb screw (A). Loosen the thumb screw(B) and adjust the edge fence until it comes in contactwith the side of the workpiece. Then tighten the thumbscrew (B) securely.123007648When planing, move the tool with the edge fence flushwith the side of the workpiece. Otherwise unevenplaning may result.CAUTION:• The blade edge should be made to protrudeoutside slightly (0.2 mm - 0.4 mm) for shiplapping.0.2 - 0.4mm007649You may wish to add to the length of the fence byattaching an extra piece of wood. Convenient holes areprovided in the fence for this purpose, and also forattaching an extension guide (optional accessory).007714Chamfering003634To make a chamfering cut as shown in the figure, alignone of three "V" grooves in the front base with the edgeof the workpiece and plane it.123007650Use of chamfering rule (optional accessory) assuresmore tool stability when shiplapping.1 2007653To install the chamfering rule, remove two screws onboth sides of the front of the tool and set the depth of cutto 4 mm. And then install it on the front base of the tooland secure it the screws as shown in the figure.When doing a great amount of chamfering, place anedge of chamfering rule so that it contacts workpiece1. Chamfering rule2. Screws1. V groove(mediumamount ofchamfering)2. V groove (smallamount ofchamfering)3. V groove (greatamount ofchamfering)1. Screw (A)2. Screw (B)3. Edge fence1. Blade edge2. Cutting line3. Depth guide

/ 12

Related manuals for Makita KP0810

Makita KP0810 Instruction Manual

Makita KP0810C Instruction Manual

This manual is suitable for:

KP0810 KP0810C

manualsdatabase

Your AI-powered manual search engine