Makita LS0714 Instruction Manual
Also see for LS0714: Instruction manualInstruction manualInstruction manualParts BreakdownInstruction manual
                                                                                                                            | |
8SPECIFICATIONSModel LS0714/ LS0714F/ LS0714FL/LS0714LBlade diameter 190 mmBlade body thickness 1.3 mm - 2.0 mmHole (arbor) diameter 20 mmMax. Miter angle Left 47° , Right 57°Max. Bevel angle Left 45°, Right 5°Max. Cutting capacities (H x W) with blade 190 mm in diameter.Bevel angleMiter angle 45° (left) 0° 5° (right)* 45 mm x 265 mm Note1 * 60 mm x 265 mm Note 1 -----0° 40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm* 45 mm x 185 mm Note2 * 60 mm x 185 mm Note 245° (left and right) 40 mm x 212 mm 52 mm x 212 mm -----* 60 mm x 145 mm Note 357° (right) ----- 52 mm x 163 mm -----(Note)* mark indicates that a wood facing with the following thickness is used.1: When using a wood facing 20 mm thick.2: When using a wood facing 15 mm thick.3: When using a wood facing 10 mm thick.No load speed (min -1) 6,000Laser Type (LS0714FL/L) Red Laser 650 nm, 1mW ( Laser Class 2 )Dimensions (L x W x H) 670 mm x 430 mm x 458 mmNet weight LS0714: 13.1 kg, LS0714F: 13.4 kg, LS0714FL: 13.7 kg, LS0714L: 13.5 kg• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END210-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ To avoid injury from flying debris, keepholding the saw head down, aftermaking cuts, until the blade has cometo a complete stop.･ When performing slide cut, first pullcarriage fully and press down handle,then push carriage toward the guidefence.･ Do not place hand or fingers close tothe blade.･ Never look into the laser beam. Directlaser beam may injure your eyes.･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE006-1Intended useThe tool is intended for accurate straight and mitercutting in wood. With appropriate saw blades, aluminumcan also be sawed. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire. |
Related manuals for Makita LS0714
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
manualsdatabase
Your AI-powered manual search engine