Makita LS1013 Instruction Manual

Also see for LS1013: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

18CAUTION:• Whenever performing the slide cut, FIRST PULL THECARRIAGE TOWARD YOU FULLY and press down thehandle to the fully lowered position, then PUSH THECARRIAGE TOWARD THE GUIDE FENCE. NEVERSTART THE CUT WITH THE CARRIAGE NOT FULLYPULLED TOWARD YOU. If you perform the slide cutwithout pulling the carriage fully or if you perform theslide cut toward your direction, the blade may kickbackunexpectedly with the potential to cause seriousPERSONAL INJURY.• Never perform the slide cut with the handle locked in thelowered position by pressing the stopper pin.• Never loosen the knob which secures the carriage whilethe blade is rotating. This may cause serious injury.3. Miter cuttingRefer to the previously covered “Adjusting the miterangle”.4. Bevel cutLoosen the lever and tilt the saw blade to set the bevelangle (Refer to the previously covered “Adjusting thebevel angle”). Be sure to retighten the lever firmly tosecure the selected bevel angle safely. Secure the work-piece with a vise. Make sure the carriage is pulled all theway back toward the operator. Switch on the tool withoutthe blade making any contact and wait until the bladeattains full speed. Then gently lower the handle to thefully lowered position while applying pressure in parallelwith the blade and PUSH THE CARRIAGE TOWARDTHE GUIDE FENCE TO CUT THE WORKPIECE. Whenthe cut is completed, switch off the tool and WAIT UNTILTHE BLADE HAS COME TO A COMPLETE STOPbefore returning the blade to its fully elevated position.CAUTION:• Always be sure that the blade will move down to beveldirection during a bevel cut. Keep hands out of path ofsaw blade.001554

/ 36

Related manuals for Makita LS1013

Makita LS1013 Instruction Manual

This manual is suitable for:

LS1013

manualsdatabase

Your AI-powered manual search engine