Makita LS1040 Instruction Manual
Also see for LS1040: Instruction manualInstruction manualInstruction manualParts BreakdownInstruction manual
                | |
4working outdoors. Wear protecting hair coveringto contain long hair.9. Use safety glasses and hearing protection.Also use face or dust mask if the cutting operationis dusty.10. Connect dust extraction equipment.If devices are provided for the connection of dustextraction and collection facilities ensure theseare connected and properly used.11. Do not abuse the cord.Never carry the tool by the cord or yank it todisconnect it from the socket. Keep the cord awayfrom heat, oil and sharp edges.12. Secure work.Use clamps or a vice to hold the work. It is saferthan using your hand and it frees both hands tooperate the tool.13. Do not overreach.Keep proper footing and balance at all times.14. Maintain tools with care.Keep cutting tools sharp and clean for better andsafer performance. Follow instructions forlubrication and changing accessories. Inspect toolcord periodically and if damaged have it repairedby an authorized service facility. Inspect extensioncords periodically and replace, if damaged. Keephandles dry, clean and free from oil and grease.15. Disconnect tools.When not in use, before servicing and whenchanging accessories such as blades, bits andcutters.16. Remove adjusting keys and wrenches.Form the habit of checking to see that keys andadjusting wrenches are removed from the toolbefore turning it on.17. Avoid unintentional starting.Do not carry a plugged-in tool with a finger on theswitch. Ensure switch is off when plugging in.18. Use outdoor extension leads.When tool is used outdoors, use only extensioncords intended for outdoor use.19. Stay alert.Watch what you are doing. Use common sense.Do not operate tool when you are tired.20. Check damaged parts.Before further use of the tool, a guard or other partthat is damaged should be carefully checked todetermine that it will operate properly and performits intended function. Check for alignment ofmoving parts, free running of moving parts,breakage of parts, mounting and any otherconditions that may affect its operation. A guard orother part that is damaged should be properlyrepaired or replaced by an authorized servicecenter unless otherwise indicated in thisinstruction manual. Have defective switchesreplaced by an authorized service facility. Do notuse the tool if the switch does not turn it on andoff.21. Warning.The use of any accessory or attachment, otherthan those recommended in this instructionmanual or the catalog, may present a risk ofpersonal injury.22. Have your tool repaired by a qualified person.This electric tool is in accordance with the relevantsafety requirements. Repairs should only becarried out by qualified persons using originalspare parts, otherwise this may result inconsiderable danger to the user.ENB034-3ADDITIONAL SAFETY RULESFOR TOOL1. Wear eye protection.2. Keep hands out of path of saw blade. Avoidcontact with any coasting blade. It can stillcause severe injury.3. Do not operate saw without guards in place.Check blade guard for proper closing beforeeach use. Do not operate saw if blade guarddoes not move freely and close instantly.Never clamp or tie the blade guard into theopen position.4. Do not perform any operation freehand. Theworkpiece must be secured firmly against the turnbase and guide fence with the vise during alloperations. Never use your hand to secure theworkpiece.5. Never reach around saw blade.6. Turn off tool and wait for saw blade to stopbefore moving workpiece or changingsettings.7. Unplug tool before changing blade orservicing.8. Always secure all moving portions beforecarrying the tool.9. Stopper pin which locks the cutter head downis for carrying and storage purposes only andnot for any cutting operations.10. Do not use the tool in the presence of flammableliquids or gases.11. Check the blade carefully for cracks or damagebefore operation.Replace cracked or damaged blade immediately.12. Use only flanges specified for this tool.13. Be careful not to damage the arbor, flanges(especially the installing surface) or bolt. Damageto these parts could result in blade breakage. |
Related manuals for Makita LS1040
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
manualsdatabase
Your AI-powered manual search engine