Makita LS1040 Instruction Manual

Also see for LS1040: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

2 ENGLISHSPECIFICATIONSModel LS1040 / LS1040S LS1040F / LS1040FSBlade diameter 255 mm - 260 mmHole diameter For all countries other thanEuropean countries25.4 mm, 25 mm or 30 mm (Country specific)For European countries 30 mmMax. kerf thickness of the saw blade 3.2 mmMax. Miter angle Left 45°, Right 52°Max. Bevel angle Left 45°No load speed 5,100 min -1Dimensions (L x W x H) 530 mm x 476 mm x 532 mmNet weight 11.8 kg 12.0 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2014Max. Cutting capacities (H x W) with blade 260 mm in diameterBevel angle Miter angle0° 45° (left and right)0° 93 mm x 95 mm 93 mm x 67 mm69 mm x 135 mm 69 mm x 95 mm45° (left) 53 mm x 95 mm 49 mm x 67 mm35 mm x 135 mm 35 mm x 94 mmSymbolsThe following show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.DOUBLE INSULATIONWear safety glasses.To avoid injury from flying debris, keepholding the saw head down, after makingcuts, until the blade has come to a com-plete stop.Do not place hand or fingers close to theblade.For your safety, remove the chips, smallpieces, etc. from the table top beforeoperation.Always set SUB-FENCE to left positionwhen performing left bevel cuts. Failure todo so may cause serious injury to operator.To loosen the bolt, turn it clockwise.Only for EU countriesDue to the presence of hazardous compo-nents in the equipment, used electrical andelectronic equipment may have a negativeimpact on the environment and humanhealth.Do not dispose of electrical and electronicappliances with household waste!In accordance with the European Directiveon waste electrical and electronic equip-ment and its adaptation to national law,used electrical and electronic equipmentshould be collected separately anddelivered to a separate collection pointfor municipal waste, operating in accor-dance with the environmental protectionregulations.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Intended useThe tool is intended for accurate straight and mitercutting in wood. With appropriate saw blades, aluminumcan also be sawed.Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.

/ 20

Related manuals for Makita LS1040

Makita LS1040 Instruction Manual

This manual is suitable for:

LS1040 LS1040F LS1040FS LS1040S

manualsdatabase

Your AI-powered manual search engine