Makita LS1040 Instruction Manual
Also see for LS1040: Instruction manualInstruction manualInstruction manualParts BreakdownInstruction manual
                    |
7 ENGLISH1 23 4► 1. Auxiliary plate 2. Base 3. Hex bolt 4. NutInstalling the auxiliary plate using the notch in the tool'sbase and secure it by tightening the hex bolt.Bench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stop-per pin by lowering the handle slightly and pulling thestopper pin.1► 1. Stopper pinThis tool should be bolted with two bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible per-sonal injury.ɸ9x 2185 mm 219 mm1 1► 1. BoltFUNCTIONALDESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking functionon the tool.Blade guard1► 1. Blade guardWhen lowering the handle, the blade guard rises auto-matically. The guard is spring loaded so it returns toits original position when the cut is completed and thehandle is raised. NEVER DEFEAT OR REMOVE THEBLADE GUARD OR THE SPRING WHICH ATTACHESTO THE GUARD.In the interest of your personal safety, always maintainthe blade guard in good condition. Any irregular opera-tion of the blade guard should be corrected immediately.Check to assure spring loaded return action of guard.NEVER USE THE TOOL IF THE BLADE GUARD ORSPRING ARE DAMAGED, FAULTY OR REMOVED.DOING SO IS HIGHLY DANGEROUS AND CANCAUSE SERIOUS PERSONAL INJURY.If the see-through blade guard becomes dirty, or saw-dust adheres to it in such a way that the blade is no lon-ger easily visible, unplug the saw and clean the guardcarefully with a damp cloth. Do not use solvents or anypetroleum-based cleaners on the plastic guard.If the blade guard is especially dirty and vision throughthe guard is impaired, use the supplied socket wrenchto loosen the hex bolt holding the center cover. Loosenthe hex bolt by turning it counterclockwise and raisethe blade guard and center cover. With the blade guardso positioned, cleaning can be more completely andefficiently accomplished. When cleaning is complete,reverse procedure above and secure bolt. Do notremove spring holding blade guard. If guard becomesdiscolored through age or UV light exposure, contacta Makita service center for a new guard. DO NOTDEFEAT OR REMOVE GUARD. |
Related manuals for Makita LS1040
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
Makita LS1040 Instruction Manual
manualsdatabase
Your AI-powered manual search engine