Makita LW1401 Instruction Manual
Also see for LW1400: Instruction manualInstruction manualInstruction manualInstruction manualTechnical information
            | |
Contents |
10 ENGLISH1Ź 1. Spacer blockWhen cutting workpieces over 85 mm wide at an angle,attach a straight piece of wood (spacer) over 190 mmlong x 45 mm wide to the guide plate as shown in theigure. Attach this spacer with screws through the holesin the guide plate. Make sure that the cut-off wheel doesnot contact the spacer when the tool head is depressed.123 4Ź 1. Guide plate 2. Spacer block (over 190 mm longx45 mm wide) 3. Workpiece (over 85 mm wide)4. Vise plateWhen the cut-off wheel has worn down, raise the cuttingposition by putting a spacer block which is slightly nar-rower than the workpiece as shown in the igure. Thiswill help you to utilize the wheel economically.1 2 34Ź 1. Vise plate 2. Workpiece diameter 3. Guide plate4. Spacer block widthLong workpieces must be supported by blocks oneither side so that it will be level with the base top. Usenon-lammable material for supporting blocks.1Ź 1. Supporting blockCarrying toolFold down the tool head and lock it. Hold the handlewhen carrying. |
Related manuals for Makita LW1400
Makita LW1400 Instruction Manual
Makita LW1400 Instruction Manual
Makita LW1400 Instruction Manual
Makita LW1400 Instruction Manual
Makita LW1400 Instruction Manual
Makita DLW140 Instruction Manual
Makita DLW140 Instruction Manual
Makita DLW140 Instruction Manual
Makita DLW140 Instruction Manual
Makita DLW140 Instruction Manual
manualsdatabase
Your AI-powered manual search engine