Makita LXPK01 Instruction Manual

Also see for LXPK01: Technical information Brochure & specs

Contents

8(A) (B)(B)(A) (B)(A)(A) Front base (Movable shoe)(B) Rear base (Stationary shoe)Correct settingNicks in surfaceGouging at startGouging at endAlthough this side view cannotshow it, the edges of the bladesrun perfectly parallel to the rearbase surface.Cause: One or both blades fails tohave edge parallel to rearbase line.Cause: One or both blade edgesfails to protrude enough inrelation to rear base line.Cause: One or both blade edgesprotrudes too far in relationto rear base line.EN0004-1Dust bag (optional accessory)12011741For tool without nozzleRemove the chip cover and install the nozzle (optionalaccessory). Attach the dust bag onto the nozzle . Thenozzle is tapered. When attaching the dust bag, push itonto the nozzle firmly as far as it will go to prevent it fromcoming off during operation.For tool with nozzleAttach the dust bag onto the nozzle. The nozzle istapered. When attaching the dust bag, push it onto thenozzle firmly as far as it will go to prevent it from comingoff during operation.1007802When the dust bag is about half full, remove the dustbag from the tool and pull the fastener out. Empty thedust bag of its contents, tapping it lightly so as to removeparticles adhering to the insides which might hamperfurther collection.NOTE:• If you connect a Makita vacuum cleaner to this tool,more efficient and cleaner operations can beperformed.1. Fastener1. Nozzle2. Dust bag