Makita RP0900 Instruction Manual

Also see for RP0900: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

9Drill point double flush trimming bit (Fig. 23)mmCorner rounding bit (Fig. 24)mmChamfering bit (Fig. 25)mmCove beading bit (Fig. 26)mmBall bearing flush trimming bit (Fig. 27)mmBall bearing corner rounding bit (Fig. 28)mmBall bearing chamfering bit (Fig. 29)mmBall bearing beading bit (Fig. 30)mmBall bearing cove beading bit (Fig. 31)mmBall bearing roman ogee bit (Fig. 32)mmNoise ENG102-3The typical A-weighted noise level determined accordingto EN60745:Sound pressure level (L pA ): 89 dB (A)Sound power level (LWA): 100 dB (A)Uncertainty (K): 3 dB (A)Wear ear protection.Vibration ENG223-2The vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: cuttig grooves in MDFVibration emission (ah ): 4.0 m/s2Uncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH101-13EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:RouterModel No./ Type: RP0900are of series production andConforms to the following European Directives:98/37/EC until 28th December 2009 and then with2006/42/EC from 29th December 2009And are manufactured in accordance with the followingstandards or standardised documents:EN60745D A L 1 L 2 L 3 L 48 8 80 55 20 256 6 70 40 12 14D A 1 A 2 L 1 L 2 L 3 R6 25 9 48 13 5 86 20 8 45 10 4 4D A L 1 L 2 L 3 θ6 23 46 11 6 30°6 20 50 13 5 45°6 20 49 14 2 60°D A L 1 L 2 R6 20 43 8 46 25 48 13 8D A L 1 L 26 10 50 201/4”D A 1 A 2 L 1 L 2 L 3 R6 15 8 37 7 3.5 36 21 8 40 10 3.5 61/4”D A 1 A 2 L 1 L 2 θ6 26 8 42 12 45°1/4”6 20 8 41 11 60°D A 1 A 2 A 3 L 1 L 2 L 3 R6 20 12 8 40 10 5.5 46 26 12 8 42 12 4.5 7D A 1 A 2 A 3 A 4 L 1 L 2 L 3 R6 20 18 12 8 40 10 5.5 36 26 22 12 8 42 12 5 5D A 1 A 2 L 1 L 2 L 3 R1 R26 20 8 40 10 4.5 2.5 4.56 26 8 42 12 4.5 3 6