Makita RP1800 Instruction Manual

Also see for RP1800: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita RP1800 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel RP1800 /RP1800FRP1801 /RP1801F RP2300FC RP2301FCCollet chuck capacity 12 mm or 1/2"Plunge capacity 0 - 70 mmNo load speed (min -1) 22,000 9,000 - 22,000Overall length 312 mmNet weight 6.0 kg 6.1 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Note: Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-4SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE010-1Intended useThe tool is intended for flush trimming and profiling ofwood, plastic and similar materials. ENF002-1Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated in accordance with EuropeanStandard and can, therefore, also be used from socketswithout earth wire.For Model RP1800 ENF100-1For public low-voltage distribution systems ofbetween 220 V and 250 V.Switching operations of electric apparatus cause voltagefluctuations. The operation of this device underunfavorable mains conditions can have adverse effectsto the operation of other equipment. With a mainsimpedance equal or less than 0.40 Ohms it can bepresumed that there will be no negative effects. Themains socket used for this device must be protected witha fuse or protective circuit breaker having slow trippingcharacteristics.For Model RP1800F ENF100-1For public low-voltage distribution systems ofbetween 220 V and 250 V.Switching operations of electric apparatus cause voltagefluctuations. The operation of this device underunfavorable mains conditions can have adverse effectsto the operation of other equipment. With a mainsimpedance equal or less than 0.39 Ohms it can bepresumed that there will be no negative effects. Themains socket used for this device must be protected witha fuse or protective circuit breaker having slow trippingcharacteristics.For Model RP1801 ENF100-1For public low-voltage distribution systems ofbetween 220 V and 250 V.Switching operations of electric apparatus cause voltagefluctuations. The operation of this device underunfavorable mains conditions can have adverse effectsto the operation of other equipment. With a mainsimpedance equal or less than 0.38 Ohms it can bepresumed that there will be no negative effects. Themains socket used for this device must be protected witha fuse or protective circuit breaker having slow trippingcharacteristics.