Makita SH02 Instruction Manual

Also see for SH02: Instruction manual

3ENGLISHdust collection can reduce dust-related hazards.Power tool use and care1. Do not force the power tool. Use the correctpower tool for your application. The correctpower tool will do the job better and safer at therate for which it was designed.2. Do not use the power tool if the switch doesnot turn it on and off. Any power tool that cannotbe controlled with the switch is dangerous andmust be repaired.3. Disconnect the plug from the power sourceand/or the battery pack from the power toolbefore making any adjustments, changingaccessories, or storing power tools. Such pre-ventive safety measures reduce the risk of startingthe power tool accidentally.4. Store idle power tools out of the reach of chil-dren and do not allow persons unfamiliar withthe power tool or these instructions to operatethe power tool. Power tools are dangerous in thehands of untrained users.5. Maintain power tools. Check for misalignmentor binding of moving parts, breakage of partsand any other condition that may affect thepower tool’s operation. If damaged, have thepower tool repaired before use. Many accidentsare caused by poorly maintained power tools.6. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.7. Use the power tool, accessories and tool bitsetc. in accordance with these instructions, tak-ing into account the working conditions andthe work to be performed. Use of the power toolfor operations different from those intended couldresult in a hazardous situation.Battery tool use and care1. Recharge only with the charger specified bythe manufacturer. A charger that is suitable forone type of battery pack may create a risk of firewhen used with another battery pack.2. Use power tools only with specifically desig-nated battery packs. Use of any other batterypacks may create a risk of injury and fire.3. When battery pack is not in use, keep it awayfrom other metal objects, like paper clips,coins, keys, nails, screws or other small metalobjects, that can make a connection from oneterminal to another. Shorting the battery termi-nals together may cause burns or a fire.4. Under abusive conditions, liquid may beejected from the battery; avoid contact. If con-tact accidentally occurs, flush with water. Ifliquid contacts eyes, additionally seek medicalhelp. Liquid ejected from the battery may causeirritation or burns.Service1. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.2. Follow instruction for lubricating and chang-ing accessories.3. Keep handles dry, clean and free from oil andgrease.Cordless circular saw safetywarningsCutting procedures1. DANGER: Keep hands away from cuttingarea and the blade. Keep your second handon auxiliary handle, or motor housing. If bothhands are holding the saw, they cannot be cut bythe blade.2. Do not reach underneath the workpiece. Theguard cannot protect you from the blade below theworkpiece.3. Adjust the cutting depth to the thickness ofthe workpiece. Less than a full tooth of the bladeteeth should be visible below the workpiece.4. Never hold piece being cut in your hands oracross your leg. Secure the workpiece to astable platform. It is important to support thework properly to minimize body exposure, bladebinding, or loss of control.5. Hold the power tool by insulated grippingsurfaces only, when performing an operationwhere the cutting tool may contact hiddenwiring. Contact with a “live” wire will also makeexposed metal parts of the power tool “live” andcould give the operator an electric shock.6. When ripping, always use a rip fence orstraight edge guide. This improves the accuracyof cut and reduces the chance of blade binding.7. Always use blades with correct size and shape(diamond versus round) of arbour holes.Blades that do not match the mounting hardwareof the saw will run eccentrically, causing loss ofcontrol.8. Never use damaged or incorrect blade wash-ers or bolt. The blade washers and bolt werespecially designed for your saw, for optimumperformance and safety of operation.Kickback causes and related warnings— kickback is a sudden reaction to a pinched, boundor misaligned saw blade, causing an uncontrolledsaw to lift up and out of the workpiece toward theoperator;— when the blade is pinched or bound tightly by thekerf closing down, the blade stalls and the motorreaction drives the unit rapidly back toward theoperator;— if the blade becomes twisted or misaligned in the