Makita SH02 Instruction Manual

Also see for SH02: Instruction manual

7ENGLISHIndicating the remaining batterycapacityOnly for battery cartridges with "B" at the end of themodel number121. Indicator lamps 2. Check buttonPress the check button on the battery cartridge to indi-cate the remaining battery capacity. The indicator lampslight up for few seconds.Indicator lamps RemainingcapacityLighted Off75% to 100%50% to 75%25% to 50%0% to 25%NOTE: Depending on the conditions of use and theambient temperature, the indication may differ slightlyfrom the actual capacity.Adjusting depth of cut121. Clamping screw 2. Depth guideCAUTION: After adjusting the depth of cut,always tighten the clamping screw securely.Loosen the clamping screw on the depth guide andmove the base up or down. At the desired depth of cut,secure the base by tightening the clamping screw.For cleaner, safer cuts, set cut depth so that no morethan one blade tooth projects below workpiece. Usingproper cut depth helps to reduce potential for danger-ous KICKBACKS which can cause personal injury.Bevel cutting121. Clamping screw 2. Bevel scale plateLoosen the clamping screw on the bevel scale plate onthe front of the base. Set for the desired angle (0° - 45°)by tilting accordingly, then tighten the clamping screwsecurely.SightingAB 11. Cutting lineFor straight cuts, align the A position on the front of thebase with your cutting line. For 45° bevel cuts, align theB position with it.