Makita UC022G Instruction Manual

Also see for UC021G: Instruction manual Instruction manual Instruction manual Instruction manual

14 ENGLISH8. Turn the adjusting dial to "-" direction to slide theadjusting pin in the direction of arrow.12Fig.13► 1. Adjusting dial 2. Adjusting pin9. Place the sprocket cover on the chain saw so thatthe adjusting pin is positioned in a small hole on theguide bar.123Fig.14► 1. Sprocket cover 2. Guide bar 3. Hole10. Turn the lever clockwise fully and turn back thelever a little to keep looseness for adjusting the chaintension.11. Adjust the chain tension. Refer to the section foradjusting saw chain tension for procedure.12. Turn the lever clockwise until the sprocket cover issecured then return it to the original position.12Fig.15► 1. Lever 2. Sprocket coverRemoving the saw chainTo remove the saw chain, perform the following steps:1. Release the chain brake by pulling the front handguard.2. Turn the adjusting dial to "-" direction to releasethe saw chain tension.1Fig.16► 1. Adjusting dial