Makita UC100D Instruction Manual

Also see for UC100D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: UC100DOverall length(without guide bar and battery)350 mmRated voltage D.C. 10.8 V - 12 V maxNet weight *1 1.0 kg*2 1.5 - 1.6 kgStandard guide bar length 100 mmRecommended guide bar length 100 mmApplicable saw chain type(refer to the table below)80TXLSprocket Number of teeth 7Pitch 0.325″Chain speed 0 - 8.0 m/s(0 - 480 m/min)Chain oil tank volume 55 cm 3• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differdepending on the attachment(s), including the battery cartridge(s).Saw chain, guide bar, and sprocket combinationSaw chain type 80TXLNumber of drive links 26Guide bar Guide bar length 100 mmCutting length 111 mmPitch 0.325″Gauge 1.1 mmType Hard nose barSprocket Number of teeth 7Pitch 0.325″WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury mayresult.Applicable battery cartridge and chargerBattery cartridge BL1016 / BL1021B / BL1041BCharger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.