Makita UH4261 Instruction Manual

Also see for UH4261: Instruction manual Technical information Instruction manual Technical information Instruction manual

6 ENGLISHNoiseThe typical A-weighted noise level determined according to EN62841-4-2:Model Sound pressure level GuaranteedsoundpowerlevelMeasured sound powerlevelLpA (dB(A)) UncertaintyK (dB(A))LwA (dB(A)) LwA (dB(A)) UncertaintyK (dB(A))UH4261 85 3 96 93 2.1UH4861 85 3 96 93 2.1UH5261 85 3 96 93 2.1NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method andmay be used for comparing one tool with another.NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actual use of the power tool can differ from the declared val-ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.WARNING: Be sure to identify safety measures to protect the operator that are based on an estimationof exposure in the actual conditions of use (taking account of all parts of the operating cycle such as thetimes when the tool is switched off and when it is running idle in addition to the trigger time).VibrationThe vibration total value (tri-axial vector sum) determined according to EN62841-4-2:Work mode: hedge trimmingModel Vibration emission (ah) : (m/s2) Uncertainty (K) : (m/s2)UH4261 6.7 1.5UH4861 6.7 1.5UH5261 6.7 1.5NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method andmay be used for comparing one tool with another.NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.WARNING: The vibration emission during actual use of the power tool can differ from the declaredvalue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.WARNING: Be sure to identify safety measures to protect the operator that are based on an estimationof exposure in the actual conditions of use (taking account of all parts of the operating cycle such as thetimes when the tool is switched off and when it is running idle in addition to the trigger time).Declarations of ConformityFor European countries onlyThe Declarations of conformity are included in Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING Read all safety warnings, instructions,illustrations and specifications provided with thispower tool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or serious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Hedge trimmer safety warnings1. Do not use the hedge trimmer in bad weather con-ditions, especially when there is a risk of lightning.This decreases the risk of being struck by lightning.2. Keep all power cords and cables away fromcutting area. Power cords or cables may be hid-den in hedges or bushes and can be accidentallycut by the blade.3. Wear ear protection. Adequate protective equip-ment will reduce the risk of hearing loss.