Manitowoc EC Serie Installation Use And Care Manual

Contents

4-4Maintenance Section 4SANITIZING PROCEDUREUse sanitizer to remove algae or slime. Do not use itto remove lime scale or other mineral deposits.Step 1 Set the toggle switch to the OFF positionafter ice falls from the evaporator at the end of aHarvest cycle. Or, set the switch to the OFF positionand allow the ice to melt off the evaporator.CAUTIONNever use anything to force ice from theevaporator. Damage may result.Step 2: Remove all ice from the bin.Step 3 Refer to removal of parts for cleaning /sanitizing and remove ice machine parts.Step 4 Mix a solution of 15 liters of water with90 ml sanitizer.Step 5 Use the sanitizing solution and a sponge orcloth to sanitize (wipe) all parts and interior surfacesof the ice machine. Sanitize the following areas:• Side Walls• Base (area above water trough)• Evaporator plastic parts• Bin or dispenserStep 6 Rinse all sanitized areas with clear water.Step 7 Install the removed parts, restore power andplace toggle switch in the WASH position.Step 8 Add the proper amount of Ice MachineSanitizer to the water trough.Model Amount of SanitizerECV100 90mlStep 9 The ice machine will automatically time out aten-minute sanitizing cycle, followed by five rinsecycles, and then stop. This entire cycle lastsapproximately 22 minutes.Step 10 When the sanitizing process stops, move thetoggle switch to the ICE position.