Manitowoc Indigo I0300 Installation, Operation And Maintenance Manual

Contents

Manitowoc Indigo I0300 Installation, Operation And Maintenance Manual Manual pdf 34 page image

34 Part Number: 000013325 Rev 01 4/16Operation Section 3LuminIce® II ReminderThe LuminIce® growth inhibitor recirculates the air in the icemachine foodzone over a UV bulb. This process will inhibitthe growth of common micro-organisms on all exposedfoodzone surfaces.The LuminIce® II has a feature that displays a reminder tochange its bulb every 12 months.1. From the Set-Up menu, use the Down arrow tohighlight LUMINICE.2. Press the Checkmark. On this screen, you can choose toturn the reminder to AUTO or OFF by highlighting yourchoice and pressing the Checkmark. Selecting one willdeselect the other.3. When the check reflects your preference, use the Downarrow to navigate to Exit and press the Checkmark. Thedisplay will return to the Set-Up menu.USB SetupRefer to “Upgrading Firmware with a Flash Drive” and“Exporting Data to a Flash Drive” for more information onthis setting.ENERGY SAVER MENUFrom the Main menu, use the Down arrow to navigate toEnergy Saver and press the Checkmark. Set up an energysaving ice program, enable the Water Miser and view usagestatistics from this menu. Press the Left arrow to return toprevious screens.Energy Saver Ice ProgramWater MiserStatisticsExitEnergy Saver MenuIce ProgramTo save energy and water, the ice machine can beprogrammed to only power up during time periods that theice will be used or when the bin level is being depleted byheavy use.ImportantSetting an ice program will take the ice machine out ofthe On/Off Mode and the Power button will be disabled.1. In the Energy Saver menu, ensure that Ice Program ishighlighted.2. Press the Checkmark. On this screen, you can choose toturn on the time program or the bin level program byhighlighting your choice and pressing the Checkmark.Selecting one will deselect the other. If one of them isselected and you wish to turn both off, highlight thechoice and press Checkmark again.3. If neither of the programs is selected, highlighting Nextand pressing the Checkmark will simply return to thetop of this screen. If one of the programs is selected,highlight Next and press the Checkmark to choose thetimes or bin levels. NOTE: For details on how to usethe cursor for the time program, refer to “Display PanelNavigation” in this section.4. Select Exit to return to previous screens and again tothe Energy Saver menu.