Manitowoc Indigo I0300 Installation, Operation And Maintenance Manual

Contents

Manitowoc Indigo I0300 Installation, Operation And Maintenance Manual Manual pdf 41 page image

Part Number: 000013325 Rev 01 4/16 41Section 4 MaintenanceStep 6 Mix a solution of cleaner and lukewarm water.Depending upon the amount of mineral buildup, a largerquantity of solution may be required. Use the ratio in thetable below to mix enough solution to thoroughly clean allparts.Solution Type Water Mixed WithCleaner 4 L (1 gal) 475 ml (16 oz) cleanerStep 7 Use half of the cleaner/water mixture to cleanall components. The cleaner solution will foam when itcontacts lime scale and mineral deposits; once the foamingstops, use a soft-bristle nylon brush, sponge or cloth (NOTa wire brush) to carefully clean the parts. Soak parts for 5minutes (15 - 20 minutes for heavily scaled parts). Rinse allcomponents with clean water.Step 8 While components are soaking, use half of thecleaner/water solution to clean all foodzone surfaces of theice machine and bin (or dispenser). Use a nylon brush orcloth to thoroughly clean the following ice machine areas:• Side walls• Base (area above water trough)• Evaporator plastic parts - including top, bottom andsides• Bin or dispenserRinse all areas thoroughly with clean water.SANITIZING PROCEDUREStep 9 Mix a solution of sanitizer and lukewarm water.Solution Type Water Mixed WithSanitizer 12 L (3 gal) 60 ml (2 oz) sanitizerStep 10 Use half of the sanitizer/water solution to sanitizeall removed components. Use a spray bottle to liberallyapply the solution to all surfaces of the removed parts orsoak the removed parts in the sanitizer/water solution. Donot rinse parts after sanitizing.Step 11 Use half of the sanitizer/water solution to sanitizeall foodzone surfaces of the ice machine and bin (ordispenser). Use a spray bottle to liberally apply the solution.When sanitizing, pay particular attention to the followingareas:• Side walls• Base (area above water trough)• Evaporator plastic parts - including top, bottom andsides• Bin or dispenserDo not rinse the sanitized areas.Step 12 Replace all removed components.Step 13 Wait 20 minutes.Step 14 Reapply power to the ice machine and performthe following key strokes.• Press Cleaning button• Press Checkmark• Press Checkmark to select Auto Ice - onStep 15 Wait until the water trough refills and the displayindicates to add solution (approximately 1 minute). Add theproper amount of Manitowoc Ice Machine Sanitizer to thewater trough by pouring between the water curtain andevaporator.Model Amount of SanitizerI0300/I0320/I0520 90 ml (3 oz)I0450/I0500/I0600/I0606I0686C/IB0690C/I0850/IB0980CIB0896C/I0870C/I0876CI0906/I0976CI1076C/I1000/IB1090CI1100/I1106/I1070C/I1176CI120090 ml (3 oz)IB1090C/IB1096C 104 ml (3.5 oz)I1400/I1406C/I1800/I1806C 180 ml (6 oz)I1470C/I1476C/I1870C/I1876CI2170C/I2176C 355 ml (12 oz)I3300/I3070C 740 ml (25 oz)Step 16 Close and secure the front door. The ice machinewill automatically start ice making after the sanitize cycle iscomplete (approximately 24 minutes).