Manitowoc Q130 Installation, Use & Care Manual

Also see for Q210 series: Replacement manual Installation, use & care manual Technician's handbook Installation and service manual Installation, use & care manual

Section 4 MaintenancePart Number 040002380 9/12 19H. Remove the ice damper.Q130• Grasp left side of ice damper and apply pressureagainst the right-hand ice damper mounting bracket.• Pull forward on the ice damper until the left-handmounting pin disengages.Installation• Grasp the right side of ice damper and place lefthand pin in the mounting bracket.• While applying pressure against the left-handmounting bracket push the damper until the right-hand mounting pin engages.Q170/Q210/Q270• Grasp ice damper and apply pressure toward the lefthand mounting bracket.• Apply pressure to the right hand mounting bracketwith thumb.• Pull ice damper forward when the right hand icedamper pin disengages.Installation• Place ice damper pin in left hand mounting bracketand apply pressure toward the left hand mountingbracket.• Apply pressure to the right hand mounting bracketwith thumb.• Push ice damper toward evaporator until right handdamper pin engages.I. Remove the Bin Door• Grasp the rear of the bin door and pull bin doorforward approximately 5".• Slide bin door to the rear while applying upwardpressure (The rear door pins will ride up into the trackslot and slide backward to the stop tab).• While applying pressure against the bin door pulldown on the rear of each bin door track until the doorpins clear the stop tabs.• Slide the rear door pins off the end and then belowthe door track. Slide bin door forward allowing theback of the door to lower into the bin. Continueforward with the bin door until the front pins bottomout in the track.• Lift right side of door until the front pins clear thetrack, then remove door from bin.• Remove rollers (4) from all door pins.TRACK SLOTSLIDE DOORFORWARDSTOP TAB PRESS DOWN TORELEASE DOORROLLER