Manitowoc RF Installation And Use Manual

Also see for RF1200W: User manual Technician's handbook Installation, use & care manual

Contents

Maintenance Section 423 Part Number 000007644 3/11Removal of Parts for Cleaning/Sanitizing1. Turn off the water supply to the ice machine at thewater service valve.2. Remove the components listed on the followingpages for cleaning and sanitizing.3. Soak the removed part(s) in a properly mixedsolution of cleaner and water.4. Use a soft-bristle brush or sponge (NOT a wirebrush) to carefully clean the parts.5. Use the solution and a brush or sponge to clean alldisassembled components and the inside of the bin.6. Rinse all cleaned parts with clear water.7. Mix a solution of sanitizer and water.8. Soak the parts in the sanitizer/water solution for10 minutes. Use the sanitizer/water solution and asponge to sanitize all removed components and theinside of the bin. Do not rinse the sanitized parts.9. Continue with step 11 of the cleaning/sanitizingprocedure.ICE CHUTE REMOVALRFS0300/RFS0650/RF1200/RF2300 Only1. Place the toggle switch in the OFF position, turn offthe water supply and disconnect electrical power tothe ice machine.2. Disconnect water supply.3. Remove water reservoir cover.4. Remove microswitch and bin thermostat from the icechute.5. Remove retainer, ice chute elbow and ice chute.! WarningDisconnect electric power to the ice machine at theelectric switch box and wear rubber gloves andsafety goggles (or face shield) while handlingcleaner or sanitizer.! CautionDo not mix Cleaner and Sanitizer solutions together.It is a violation of Federal law to use these solutionsin a manner inconsistent with their labeling.Solution Type Water Mixed WithCleaner 1 gal. (4 L) 16 oz (500 ml) cleanerPart Number 000000084Solution Type Water Mixed WithSanitizer 3 gal. (11 L) 2 oz (60 ml) sanitizerPart Number 94-0565-3