Operation Section 310 Part Number 000007463 11/11Operational ChecksGENERALManitowoc ice machines are factory-operated andadjusted before shipment. Normally, a newly installed icemachine does not require any adjustment.To ensure proper operation, always follow theOperational Checks:• when starting the ice machine for the first time• after a prolonged out of service period• after cleaning and sanitizingNOTE: Routine adjustments and maintenanceprocedures outlined in this manual are not covered bythe warranty.Blue LightThe blue light on the dispensing spout is energizedwhen the toggle switch is in the ICE position and the icemachine is operational. If the light is not energized theice machine will not make ice. Refer to section 5Customer Support if the ice machine has power and thelight will not energize.Toggle SwitchThe toggle switch must be placed in the ON position tomake ice.Water ReservoirThe water reservoir must be 2/3 full of water and thewater sensing float must be up (switch closed) beforethe ice machine will start.Ice ProductionAllow the ice machine to produce ice for 15 minutesbefore testing the dispense mechanism. This will insurea sufficient quantity of ice in the bin for dispensing.OPERATION1. Set Selector SwitchDepress the button adjacent to the text.• Select ICE for ice dispense only• Select ICE/WATER for water and ice• Select WATER for water only2. DispenseLever ActivatedUse glass or container to press dispenser armbackward. Release the arm and the ice machine willstop dispensing.Touchless Center ActivatedPlace a glass or container underneath the dispensingspout within 1" (2.5 cm) of the sensor. The ice machinewill automatically dispense. Remove the glass orcontainer to stop dispensing.WATERSENSINGFLOAT