MuxLab 100504 Quick Installation Manual

Also see for 100504: Quick installation guide User manual

MuxLab 100504 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000920-A SE-000920-A2321 Cohen St, Montreal, Quebec, Canada. H4R 2N7Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: info@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.4 (3D)Devices DVD, plasma, projectors, monitors, TV, PC, laptops, serverssupporting HDMI.Transmission Transparent to the user.Frequency 165 MHz.Signals HDMI 1.4 protocol.ConnectorsCables not included.2 HDMI Type A and 2 (two) 3.5mm jacks for the TX1 HDMI Type A and 2 (two) 3.5mm jacks for the RX1 S/PDIF Female for the RXMaximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.Cat 5e/6: 164 ft (50 m) up to 1080p60Note: When installed in an electrically noisy environment, anSTP cable must be used. Also, cross-connection reduces theeffective distance depending on the grade of twisted cable used.RJ45 PinConfigurationReverse PolaritySensitive. UseEIA/TIA 568A or 586Bstraight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Audio Dolby Digital Plus, Dolby TrueHD and DTS-HD Master AudioHDCP Revision 1.1Cable One (1) Cat 5e/6 or better twisted pair cable requiredPower Supply One (1) 5 V / 1 A DCPower Consumption Transmitter: 3.2 Watt Receiver: 2.2 WattTemperature Operating: 0° to 40°C Storage: -20° to 60°CHumidity: Up to 90% non-condensingEnclosure MetalDimensions 65 mm x 118 mm x 26 mmWeight 410 g (TX+RX)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 1 yearOrder Information 100504 HDMI Extender (UPC: 627699505045)HDMI Extender Kit over UTPQuick Installation Guide100504OverviewThe HDMI Extender Kit over UTP (100504) allows HDMI equipment to be connectedup to 164 ft (50 m) @ 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in apoint-to-point configuration. The 100504 includes one (1) Transmitter and one (1)Receiver as well as an IR Emitter and IR Sensor for remote control applications. Theextender supports up to 1920 X 1080p60 and VGA-UXGA resolutions. It is HDCP 1.1compliant and able to transport not only HDMI video but also the new losslesscompressed digital audio.ApplicationsApplications include digital signage, commercial and residential AV systems, classroomprojector systems, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on the productend panels.2. Verify that the distance between the HDMI Transmitter and Receiver is withinMuxLab specifications (see specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliantcable.3b. Connect one (1) length of Cat 5e/6 (or higher) grade UTP cable to theRJ45 LINK connector on the Transmitter.4. To install the Receiver:4a. Connect the Receiver to the HDMI display equipment with an HDMI compliantcable.4b. Connect one (1) Cat 5e/6 cable to the RJ45 LINK connector on the Receiver.5. Connect the 48VDC power supply to both the Transmitter and Receiver first. Ifpower is present, the blue power LED of the Transmitter and the Receiver will beON.Note: Power-up the HDMI Extender only after all connections are made.6. Power-up the HDMI equipment and verify the image quality.7. This product support bi-directional IR control. If infrared remote control is neededto control the Source equipment from the Display, connect the IR Sensor to the3.5mm Stereo Jack of the receiver and the IR Emitter to the 3.5mm Mono Jack ofthe Transmitter.Note: The IR Sensor has a black color while the IR Emitter has a clear color.

/ 2

Related manuals for MuxLab 100504