MuxLab 500757 Quick Installation Manual

Also see for 500757: Quick installation guide Quick setup guide

MuxLab 500757 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000816-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI (up to 1080p, 30fps)Devices DVD, plasma, projectors, monitors, TV, PC, laptops, serverssupporting HDMI.Control Controllable via the Ethernet port.HDMI standard HDMI ver. 1.3, HDCP 1.1Connectors One (1) HDMI receptacle.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.One (1) 3.5mm jack for IR emitter/sensor.Six (6) DIP Switches for device ID addressing.Note: HDMI and CAT5e/6 cables not included.Maximum Distance On HDMI (per side): 6.6ft (2m)On Cat5e/6: 330ft (100m)Latency Less than 500msCompression Video: H.264 fully compliant with ISO/IEC 14496-10 high profileand level 4.1, up to 1920x1080p@30fpsAudio: MPEGNetwork Requirement Compliant with the full IEEE 802.3-2002 specifications(100BaseTX).Network Bandwidth Video: 18Mbps, Audio: 256kbsIR Frequency 38KHzRJ45 PinConfigurationUse EIA/TIA 568A or586B straight-throughwiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Power Supply One (1) 110-240V/5VDC power supply with interchangeable blades isincluded with each Transmitter and Receiver.PoE IEEE 802.3afPower Consumption Transmitter: 4.5 Watt Receiver: 2.5 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure Metal enclosure.Dimensions 4.1” x 4.6” x 1.0” (110mm x 120mm x 25mm)Weight 1.5 lb. (0.7 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500757 HDMI over IP H264 Extender Kit with PoE500757-TX HDMI over IP H264 Transmitter with PoE500757-RX HDMI over IP H264 Receiver with PoEHDMI over IP H.264 Extender Kit, with PoE500757Quick Installation GuideOverviewThe HDMI over IP H.264 Extender Kit with PoE (500757) allows HDMI equipment to beconnected up to 330ft. (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in apoint-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible byconnecting several Transmitters and Receivers to the same local Ethernet network. The Transmitter(500757-TX) and Receiver (500757-RX) may be sold separately, and support PoE (PD) if usedwith a PoE Ethernet Switch. The kit comes with one (1) Transmitter and one (1) Receiver as wellas an IR Emitter and IR Sensor for remote control applications.For the point-to-multipoint and multipoint-to-multipoint configurations the Ethernet Switch musthave Gigabit ports, DHCP Server capability and additionally support the IGMP communicationprotocol for the multipoint-to-multipoint case. MuxLab recommends using the Cisco SG300 SeriesManaged Switches.The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration andutilization of the 500757 and other MuxLab IP based products via an Ethernet web interface.ApplicationsApplications include commercial and residential AV systems, classroom projector systems, digitalsignage, boardroom systems, collaborative PC systems, and medical information systems.

/ 2

Related manuals for MuxLab 500757