MuxLab 500451 Quick Installation Manual

Also see for 500451: Quick installation guide Quick installation guide Quick installation guide

MuxLab 500451 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000728-C SE-000728-C2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: info@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.4aDevices DVDs, Blu-ray players, projectors, monitors, TVs, PCs, laptops,servers supporting HDMI.Transmission Transparent to the userBandwidth 340 MHzSignals HDMI 1.4a protocolConnectorsCables not included.One (1) HDMI receptacle.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.Two (2) 3.5mm jacks for IR emitter and sensor.One (1) 2.1mm locking power connector.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.4K/30 (4:4:4): Cat 5e/6: 131ft (40m)4K/60 (4:2:0): Cat 5e/6: 131ft (40m)1080p: Cat 5e/6: 230ft (70m)1080p Deep Color: Cat 5e/6: 230ft (70m)Note: When installed in an electrically noisy environment, an STPcable must be used. Also, cross-connection reduces the effectivedistance depending on the grade of twisted cable used.RJ45 PinConfigurationReverse PolaritySensitive. Use EIA/TIA568A or 586B straight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable One (1) Cat 5e/6 or better twisted pair cables requiredPower Supply Two (2) 110-240V/5VDC power supplies with interchangeable bladesPower Consumption Transmitter: 1.6 Watt Receiver: 3.2 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure MetalDimensions 4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)Weight 1.4 lbs (0.6 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500451 HDMI Extender Kit, HDBT, UHD-4K500451-TX HDMI Transmitter, HDBT, UHD-4K500451-RX HDMI Receiver, HDBT, UHD-4KHDMI Extender Kit, HDBT, UHD-4K500451 (Kit), 500451-TX (TX only), 500451-RX (RX only)Quick Installation GuideOverviewThe HDMI Extender Kit, HDBT, UHD-4K (500451) allows HDMI equipment to beconnected up to 131ft (40m) @ 4K/30 (4:4:4) or 4K/60 (4:2:0) resolution, or up to 230ft(70m) @ 1080p Deep Color via one (1) Cat 5e/6 unshielded twisted pair cables in apoint-to-point configuration. The kit comes with one (1) Transmitter and one (1)Receiver as well as an IR Emitter and IR Sensor for remote control applications. The500451-TX (Transmitter) and 500451-RX (Receiver) may be purchased separately. The500451-RX may be used in conjunction with MuxLab’s HDBaseT Matrix Switches. Forinstallation instructions, please refer to the Matrix Switch Installation Guide.ApplicationsApplications include commercial and residential AV systems, classroom projectorsystems, digital signage, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on the productlabels.2. Verify that the distance between the HDMI Transmitter and Receiver is withinMuxLab specifications (see Specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliantcable.3b. Connect one (1) Cat 5e/6 (or higher) grade UTP cable to the RJ45 LINKconnector on the Transmitter.4. To install the Receiver:4a. Connect the Receiver to the HDMI display equipment with an HDMIcompliant cable.Note: When used with MuxLab’s HDBaseT Matrix Switches, please consult theMatrix Switch Installation Guide.All manuals and user guides at all-guidesbox.comall-guidesbox.com

/ 2

Related manuals for MuxLab 500451