MuxLab 500040 Quick Installation Manual

Also see for 500040: Quick installation guide

Contents

MuxLab 500040 Quick Installation Manual Manual pdf 1 page image

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.com© MuxLab Inc. 94-000606-C SE-000579-CSpecificationsEnvironment VGA. VESA VP&D 1.0, VIP ver 2.0Devices CRT/LCD monitors, plasma, laptops, PCs, projectors.Transmission Transparent to the userBandwidth DC to 60 MHzInput Signals Video: 1.1 Vp-pH &V sync: TTL standard. 300 kHz max. bandwidthInsertion Loss Less than 3 dB per pair over the frequency rangeCommon Mode RejectionRatio (CMRR)15 kHz -60 dB typ.100 kHz to 10 MHz -40 dB typ.200 MHz -20 dB typ.Return Loss -15 dB max from DC to 60 MHzConnectors 500040/500042: DB15 HD Plug, RJ45 Shielded500041/500043: DB15 HD Receptacle, RJ45 ShieldedMax. Distance viaCat 5E/6 UTP/STP CableVGA: 640x480 pixels (15 MHz) 450 ft (137 m)SVGA: 800x600 pixels (30 MHz) 350 ft (107 m)XGA: 1024x768 pixels (60 MHz) 250 ft (76 m)SXGA: 1280x1024 pixels (100 MHz) 200 ft (61 m)WXGA: 1366x768 pixels 180 ft (55 m)RJ45 Pin ConfigurationEIA 568 A or BReverse Polarity SensitivePin 1(R) Pin 2(T) Balanced – RedPin 4(R) Pin 5(T) Balanced – GreenPin 7(R) Pin 8(T) Unbalanced – Blue (7 sig, 8 gnd)Pin 3(R) Pin 6(T) Unbalanced – H & V SyncCompatibility Not compatible with the VGA Balun (500010, 500011,500014) or Active VGA Balun Kit (500035. 500036)Reset button May be needed when used with certain display devicesGrounding screw Grounding screw for optional useCable Cat 5E/6 or better unshielded twisted pair (UTP)Impedance Input: RGB 75 ohms Output: RGB 100 ohmsTemperature Operating: 0° to 55°CStorage: -20° to 85°C Humidity: Up to 95% non-condensingEnclosure ABS fire retardant plasticDimensions 2.40” x 2.25 x 1.00” (6.10 x 5.72 x 2.54 cm) plus 6” (15 cm)lead on 500040 and 500042.Weight 500041/500043: 2.34 oz (66 g)500040/500042: 3.87 oz (110 g)Mounting Free-standing. Separate velcro mounting pad includedWarranty LifetimeOrder Information 500040 VGA Balun II, DB15 HD Plug, PC Side500041 VGA Balun II, DB15 HD Receptacle, Monitor Side500042 VGA Balun II, DB15 HD Plug, Monitor Side500043 VGA Balun II, DB15 HD Receptacle, PC SideVGA Balun II500040, 500041, 500042, 500043Quick Installation GuideOverviewThe VGA Balun II eliminates costly and bulky VGA cable, allowing a VGA source tobe connected to a VGA monitor via one 4-pair Cat 5E/6 unshielded twisted pair (UTP)cable. Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350 ft(107 m) via a Cat 5E/6 UTP cable at 800x600 resolution. Each VGA connectionrequires a VGA Balun II at the source (500040, 500043) and a VGA Balun II (500041or 500042) at the display.NOTES• The VGA Balun II does not support VGA handshaking and control signals. Thereforeit is necessary to set the monitor attributes prior to installing the VGA Baluns. In orderto do this, first connect the standard VGA cable directly from the PC to the monitorand then set the monitor attributes to the required settings (i.e., resolution, color, etc.).Also, in order to achieve optimum results via twisted pair, set the Contrast andBrightness levels to maximum.• The shield on the RJ45 connector is provided as an option for use in harsh electricalenvironments where shielded twisted pair cable (STP) may provide additional noiseimmunity. When using STP, ensure that the shield on both sides is grounded.

/ 2

Related manuals for MuxLab 500040