MuxLab 500422 Quick Installation Manual

Contents

MuxLab 500422 Quick Installation Manual Manual pdf 2 page image

© MuxLab Inc. 2014In order to install the HDMI 1X8 Splitter, please follow the steps below:1. Connect the HDMI video source to the input connector of the splitter.2. Connect the HDMI display equipment(s) to output connector of the splitter.3. Connect the 5 VDC power supply to the splitter first, and then plug the powersupply into an AC power outlet.4. Power on the HDMI equipment and verify the image quality.5. The following diagram shows the final configuration.TroubleshootingThe following tables describe some of the symptoms, probable causes and possible solutionsin respect to the installation of the HDMI 1X8 Splitter. If you still cannot diagnose theproblem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free inNorth America) or (+1) 514-905-0588 (International).Picture/SoundProbable Cause Possible SolutionNo Image Wiring Check continuityCheck correct wiringNo Image Synchronization Power off the source and thedisplay. Power on the devices.FlickeringImageSynchronization Check HDMI cable lengthChoppySoundSynchronization Check HDMI cable lengthNoise inimageWeak signal Check HDMI cable lengthGreen orpink hueCable Check HDMI cables andreplace.

/ 2

Related manuals for MuxLab 500421