© MuxLab Inc. 94-000708-A SE-000708-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.3aDevices DVD, plasma, projectors, monitors, TV, PC, laptops, serverssupporting HDMI.Transmission Transparent to the userBandwidth 340 MHzSignals HDMI 1.3a protocolConnectors One (1) HDMI receptacle.One (1) SC Fiber connector.3.5mm jacks for IR emitter and sensorDB9 Connectors for RS-232 PortsNote: Fiber and serial cables not included.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.1080P video may be extended up to 1000 feet (305m), depending ofthe type of fiber used.100m (300 ft) on 62.5/125 μm (OM1) multi-mode SC fiber305m (1000 ft) on 50/125 μm (OM3) multi-mode SC fiber.Cable One (1) Multimode fiber 50/125 μm or 62.5/125 μm cable requiredPower Supply Two (2) 110-240V/5VDC power supplies with interchangeable bladesPower Consumption Transmitter: 2.7 Watt Receiver: 2.3 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure SteelDimensions 4.00” x 3.00” x 0.876” (10.2 x 7.6 x 2.2 cm)Weight 2.0 lb (0.9 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500460 HDMI Fiber Extender Kit500460-RX HDMI Fiber Extender ReceiverHDMI Fiber Extender Kit500460 (Kit), 500460-RX (Receiver Only)Quick Installation GuideOverviewThe HDMI Fiber Extender Kit (500460) allows HDMI equipment to be connected up to1000 ft (305 m) @ 1080p Deep Color via one (1) 50/125 μm Multimode fiber cables in apoint-to-point configuration. The kit comes with one (1) Transmitter and one (1)Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote controlapplications. The 500460-RX receivers are used in conjunction with MuxLab’s HDMIMatrix Switch. For installation instructions, please refer to the HDMI Matrix SwitchInstallation Guide.ApplicationsApplications include commercial and residential AV systems, classroom projectorsystems, digital signage, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on the productlabels.