MuxLab 500465 Quick Installation Manual

Also see for 500465: Quick installation guide Quick installation guide

Contents

MuxLab 500465 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000746-A SE-000746-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.3aDevices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supportingHDMI.Transmission Transparent to the userBandwidth 225 MHzSignals HDMI 1.3aSupported Resolution 480i, 576i, 720p, 1080i, 1080p/23.98/24/25/29.9/30/50/59.94/60Connectors One (1) HDMI receptacle.Two (2) BNC Female 75 Ohms.Note: HDMI cables not included.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.480i: RG-59: 650 ft (198 m) RG-6: 800 ft (244 m)720p, 1080i: RG-59: 500 ft (152 m) RG-6: 650 ft (198m)1080p: RG-59: 250 ft (76 m) RG-6: 300 ft (91 m)Cable One (1) RG-59 or better cable requiredPower Supply Two (2) 110-240V/5VDC power supplies with interchangeable bladesPower Consumption Transmitter: 3.30 Watt Receiver: 3.55 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure MetalDimensions 4.72” x 3.54” x 1.18” (12.0 x 9.0 x 3.0 cm)Weight 1.3 lb (0.59 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500465 HDMI Over Coax Extender KitHDMI Over Coax Extender Kit500465Quick Installation GuideOverviewThe HDMI Over Coax Extender Kit (500465) allows HDMI equipment to be connectedup to 250 ft (76 m) @ 1080p via one (1) RG-59 coaxial cable in a point-to-pointconfiguration. The Transmitter converts the HDMI signal to coax and the Receiverconverts the coax signal back to HDMI, supporting resolutions of 480i, 720p/1080i and1080p. The kit comes with one (1) Transmitter and one (1) Receiver.ApplicationsApplications include commercial and residential AV systems, classroom projectorsystems, digital signage, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on theproduct labels.2. Verify that the distance between the Transmitter and Receiver is within MuxLabspecifications (see Specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliant

/ 2

Related manuals for MuxLab 500465