MuxLab VideoEase Installation Manual
Also see for VideoEase: Installation guide
                   | |
MuxLab Inc. TroubleshootingPage 133.3. Cascading Multiple HubsThe Audio-Video Hub may be cascaded with another hub in order to distribute a base-band audio video source to more than eight destinations. The following picture showsthe location of the Looping Output.For example an audio video presentation from a VCR or DVD source may be distributedto multiple classrooms via pre-installed Cat 5 twisted pair cable. Due to the active elec-tronics in the hub, the number of hubs that may be cascaded is eight (8).VideoEase StereoVideo Balun (500001) Cat 5 Twisted Pair (3-Pair)DVD or VCRCat 5 TP (3-Pair)9 16Cat 5 TP (3-Pair)Composite or ComponentAudio/Video Monitors1 8Classroom A Classroom BTo next hubIn order to cascade the first hub to a second hub, prepare a 4-pair Cat 5 cable from theLooping Output of the first hub to the Input Port of the second hub. The cable must beconfigured as straight-thru and terminated with RJ45 modular plugs on either end.Note: The Distribution Ports and Looping Outputs do not amplify the signal. Themaximum distance from the source to the most distant hub or monitor may be up to 2500feet depending on the type of audio-video signal being transmitted. The use of cross-connect blocks and patch panels is also supported. Each cross-connect results in an ef-fective loss of distance of 5 to 10 feet. When splicing connections onto a cross-connectblock, please ensure that the individual wires remain twisted right up within 0.5” of thecross-connect.Looping Output |
Related manuals for MuxLab VideoEase
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine