Myson LO-LINE RC 6-4 Installation, Operating, Maintenance And After Sales Manual

Also see for LO-LINE RC 14-10: Installation, operating, maintenance & after sales manual

Contents

Myson LO-LINE RC 6-4 Installation, Operating, Maintenance And After Sales Manual Manual pdf 6 page image

05LO-LINE RC & LO-LINE RC Heater Cooler7.0 Water Connections Connect unit to system flow and return pipes using the two15mm isolating valves (see fig. 3).Note: To ensure effective venting of the heat exchanger the flowpipe should be connected to the bottom connection of the heatexchanger.Note: For LO-LINE installations pipe-work must not be routeddirectly underneath the unit as this will adversely affect theoperation of the integral room thermostat. If this cannot beavoided, the pipe-work must be boxed to prevent heat rise. Ensure system is flushed in accordance with recognised bestpractice and a suitable inhibitor is added to the system asnecessary. Open valves fully, check pipe connections for leaks and ventthe heat exchanger - see Commissioning Procedure.LO-LINE Heater-Cooler installations with chilled water willrequire provision for condensate disposal in accordance with anylocal regulations.A drain tray is fitted for condensate collection within the unit.This should be connected to a 15mm drain pipe.Note: External pipe-work carrying chilled water must beinsulated. Use a suitable sealant as necessary to ensure thatcondensate does not spill or leak. Once connection to thesystem flow and return pipes is made, any exposed internal15mm pipework and isolating valves must be insulated.579968191729957Fig. 35.06.07.0For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818