Myson TS4 Installation Manual

Contents

Myson TS4 Installation Manual Manual pdf 13 page image

13Décor Radiator SeriesConventional Wall Installation-Baseboard MYSONStep 1 (A) Determine supply and return pipe location for your size radiator.Step 2 (B) Measure the distance from the floor up 4”.NOTE: The radiators must be a minimum of 4” off the floor.NOTE: (C) Measure the distance from (B) to (C) the bottom of the fins.NOTE: This is the height of the lower hangersStep 3 (D) Measure the distance from the bottom of the radiator to the bottom of the upper fins.Step 4 (E) Measure the distance from the bottom of the radiator to the top hanger and add 4”for step 3.Step 5 (F) Measure the distance from the center of the supply or return pipe to the center ofthe hanger.NOTE: Use a level to mark the hanger locations on the wall.NOTE: Attach the hangers with suitable hardware. Adequate blocking is recommendedto support the weight of the radiators.Many MYSON products are in excess of 70 pounds. Care should be taken to have help to liftlarger radiators into place to avoid lifting injuries.Wall hangingbracketRadiator finsWall studEDCB AEDCB A

/ 16

Related manuals for Myson H11 10